Monthly Archives: January 2016

NSS6,NSS8,NSS10,NSS12,NSS15,NSS20,NSS25,,NSS30,NSS35,NSS40,NSS45,NSS50,NSS55,NSS60,NSS80 cam clutch (backstop clutch) overrunning clutch (sprag clutch) one way clutch bearing

Posted on by

NSS6,NSS8,NSS10,NSS12,NSS15,NSS20,NSS25,,NSS30,NSS35,NSS40,NSS45,NSS50,NSS55,NSS60,NSS80 cam clutch (backstop clutch) overrunning clutch (sprag clutch) one way clutch bearing

One Way Clutch bearing NSS, AS

AS6,AS8,AS10,AS12,AS15,AS20,AS25,,AS30,AS35,AS40,AS45,AS50,AS55,AS60,AS80

NSS6,NSS8,NSS10,NSS12,NSS15,NSS20,NSS25,,NSS30,NSS35,NSS40,NSS45,NSS50,NSS55,NSS60,NSS80

TSS6,TSS8,TSS10,TSS12,TSS15,TSS20,TSS25,,TSS30,TSS35,TSS40,TSS45,TSS50,TSS55,TSS60,TSS80

Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62…Ball bearings.

A typical arrangement is to install this type alongside a series 62 bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft (except 6 mm bore).

The outer race has a positive r6 tolerance to give a press fit in a H7 housing. The outer housing must be strong enough

To not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2

 

Type Size Overrunning speeds Weight Dragtorque

AS (NSS)

 dH7 TKN1) nimax2) namax3) Dr6 D5 L s e f TR
[mm] [Nm] [min-1] [min-1] [mm] [mm] [mm] [mm] [mm] [mm] [kg] [Ncm]
6 2.1 5000 7500 19 15.8 6 0.3 0.6 0.3 0.01 0.18
8 3.8 4300 6500 24 20 8 1.3 0.6 0.6 0.02 0.24
10 6.8 3500 5200 30 25.9 9 1.3 0.6 0.6 0.03 0.36
12 13 3200 4800 32 28 10 1.3 0.6 0.6 0.04 0.48
15 14 2800 4300 35 31 11 1.4 0.6 0.6 0.05 0.7
20 40 2200 3300 47 40 14 2.4 0.8 0.8 0.12 1.4
25 56 1900 2900 52 45.9 15 2.4 0.8 0.8 0.14 2.4
30 90 1600 2400 62 55 16 2.4 0.8 1 0.22 7.8
35 143 1300 2000 72 64 17 2.5 0.8 1 0.31 9
40 185 1200 1800 80 72 18 2.5 0.8 1 0.39 10
45 218 1000 1600 85 77 19 2.5 1.2 1 0.44 11
50 230 950 1500 90 82 20 2.5 1.2 1 0.49 13
55 308 800 1300 100 90 21 2.5 1.2 1 0.66 14
60 508 700 1100 110 100 22 2.5 1.2 1.5 0.81 26
80 1063 600 900 140 128 26 2.5 1.2 1.5 1.41 58

Changzhou aodelong Clutch Co., Ltd. is a manufacturer specialized in Producing Various cam clutch, one way bearing, one way clutch, backstop clutch, overrunning clutch and needle roller bearing with high technology. including NF, BS, BS-R, BSEU, MZ, MZEU,MA, MI, MX, CSK (KK, BB) , DC, AS (TSS, NSS) , ASNU (TFS, NFS) , FWD, B200, RSBW, RSCI, MZ, HF, HFL. . . Etc.

The products are widely used in conveying machine, reducer, hoist, elevator, automobile, home appliances, textile machinery, printing machinery, food machinery and mine machines etc. In addition, special clutch bearings are also provided in accordance upon customers’ requirement for various applications.

QQ:2327876383

Mobile Phone:13776867712

Wechat:13776867712

Email:aodelongclutch@foxmail.com

http://www.aodclutch.com

Address: Niutang lndustrial Zone -Changzhou City,Jiangsu Province

 

 

AS6,AS8,AS10,AS12,AS15,AS20,AS25,,AS30,AS35,AS40,AS45,AS50,AS55,AS60,AS80cam clutch (backstop clutch) overrunning clutch (sprag clutch) one way clutch bearing

Posted on by

One Way Clutch bearing NSS, AS

AS6,AS8,AS10,AS12,AS15,AS20,AS25,,AS30,AS35,AS40,AS45,AS50,AS55,AS60,AS80

NSS6,NSS8,NSS10,NSS12,NSS15,NSS20,NSS25,,NSS30,NSS35,NSS40,NSS45,NSS50,NSS55,NSS60,NSS80

TSS6,TSS8,TSS10,TSS12,TSS15,TSS20,TSS25,,TSS30,TSS35,TSS40,TSS45,TSS50,TSS55,TSS60,TSS80

Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62…Ball bearings.

A typical arrangement is to install this type alongside a series 62 bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft (except 6 mm bore).

The outer race has a positive r6 tolerance to give a press fit in a H7 housing. The outer housing must be strong enough

To not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2

 

Type Size Overrunning speeds Weight Dragtorque

AS (NSS)

 dH7 TKN1) nimax2) namax3) Dr6 D5 L s e f TR
[mm] [Nm] [min-1] [min-1] [mm] [mm] [mm] [mm] [mm] [mm] [kg] [Ncm]
6 2.1 5000 7500 19 15.8 6 0.3 0.6 0.3 0.01 0.18
8 3.8 4300 6500 24 20 8 1.3 0.6 0.6 0.02 0.24
10 6.8 3500 5200 30 25.9 9 1.3 0.6 0.6 0.03 0.36
12 13 3200 4800 32 28 10 1.3 0.6 0.6 0.04 0.48
15 14 2800 4300 35 31 11 1.4 0.6 0.6 0.05 0.7
20 40 2200 3300 47 40 14 2.4 0.8 0.8 0.12 1.4
25 56 1900 2900 52 45.9 15 2.4 0.8 0.8 0.14 2.4
30 90 1600 2400 62 55 16 2.4 0.8 1 0.22 7.8
35 143 1300 2000 72 64 17 2.5 0.8 1 0.31 9
40 185 1200 1800 80 72 18 2.5 0.8 1 0.39 10
45 218 1000 1600 85 77 19 2.5 1.2 1 0.44 11
50 230 950 1500 90 82 20 2.5 1.2 1 0.49 13
55 308 800 1300 100 90 21 2.5 1.2 1 0.66 14
60 508 700 1100 110 100 22 2.5 1.2 1.5 0.81 26
80 1063 600 900 140 128 26 2.5 1.2 1.5 1.41 58

Changzhou aodelong Clutch Co., Ltd. is a manufacturer specialized in Producing Various cam clutch, one way bearing, one way clutch, backstop clutch, overrunning clutch and needle roller bearing with high technology. including NF, BS, BS-R, BSEU, MZ, MZEU,MA, MI, MX, CSK (KK, BB) , DC, AS (TSS, NSS) , ASNU (TFS, NFS) , FWD, B200, RSBW, RSCI, MZ, HF, HFL. . . Etc.

The products are widely used in conveying machine, reducer, hoist, elevator, automobile, home appliances, textile machinery, printing machinery, food machinery and mine machines etc. In addition, special clutch bearings are also provided in accordance upon customers’ requirement for various applications.

QQ:2327876383

Mobile Phone:13776867712

Wechat:13776867712

Email:aodelongclutch@foxmail.com

http://www.aodclutch.com

Address: Niutang lndustrial Zone -Changzhou City,Jiangsu Province