CK-B one way clutch bearing CK-B1042,CK-B1542,CK-B1747,CK-B2052,CK-B2562,CK-B3062,CK-B3572,CK-B4080,CK-B4585,CK-B5090,CK-B55100,CK-B60110,CK-B70125,CK-B80140,CK-B90160,CK-B3072,CK-B3580,CK-B3585,CK-B4090,CK-B45100

Posted on by
CK-B one way clutch bearing CK-B1042,CK-B1542,CK-B1747,CK-B2052,CK-B2562,CK-B3062,CK-B3572,CK-B4080,CK-B4585,CK-B5090,CK-B55100,CK-B60110,CK-B70125,CK-B80140,CK-B90160,CK-B3072,CK-B3580,CK-B3585,CK-B4090,CK-B45100

CK-B one way clutch bearing

CK-B one way clutch bearing

CK-B1042,CK-B1542,CK-B1747,CK-B2052,CK-B2562,CK-B3062,CK-B3572,CK-B4080,CK-B4585,CK-B5090,CK-B55100,CK-B60110,CK-B70125,CK-B80140,CK-B90160,CK-B3072,CK-B3580,CK-B3585,CK-B4090,CK-B45100

Type ASNU is a sprag type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation.
A typical arrangement is to install this type alongside a bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft.
The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission.
If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and uter race of ± S/2.

Nm r/min mm GB/T276-1994 kg
D
h7		 B bw× tw d
H7		 C bn×tn
CK-B1042 54 1500 500 42 23 8×1.5 10 24 3×1.4 6302 0.12
CK-B1542 54 1500 500 42 23 8×1.5 15 24 3×1.4 6302 0.17
CK-B1747 72 1500 500 47 23 8×1.5 17 24 3×1.4 6303 0.21
CK-B2052 95 1200 450 52 23 8×1.5 20 24 4×1.8 6304 0.25
CK-B2562 145 1200 450 62 23 8×1.5 25 24 4×1.8 6305 0.35
CK-B3062 166 1000 400 62 23 8×1.5 30 24 4×1.8 6206 0.32
CK-B3572 232 1000 400 72 23 8×1.5 35 24 5×2.3 6207 0.43
CK-B4080 388 1000 400 80 31 12×3.5 40 32 6×2.8 6208 0.71
CK-B4585 462 800 300 85 31 12×3.5 45 32 6×2.8 6209 0.77
CK-B5090 504 800 300 90 31 12×3.5 50 32 10×3.3 6210 0.83
CK-B55100 600 700 250 100 31 12×3.5 55 32 10×3.3 6211 1.02
CK-B60110 680 600 200 110 31 12×3.5 60 32 10×3.3 6212 1.26
CK-B70125 1220 600 200 125 38 12×3.5 70 39 12×3.3 6214 1.94
CK-B80140 1580 500 150 140 38 12×3.5 80 39 12×3.3 6216 2.39
CK-B90160 2080 500 150 160 38 12×3.5 90 39 12×3.3 6218 3.17
CK-B3072 232 1000 400 72 27 8×2.0 30 27 8×2.0 6306 0.42
CK-B3580 388 1000 400 80 31 12×2.5 35 31 10×2.6 6307 0.75
CK-B3585 462 800 300 85 31 10×2.3 35 31 6209 0.76
CK-B4090 504 800 300 90 32 12×3.5 40 33 6×2.8 6308 0.92
CK-B45100 600 700 250 100 36 14×4.5 45 36 14×2.2 6309 0.89

 

Changzhou aodelong Clutch Co., Ltd. is a manufacturer specialized in Producing Various cam clutch, one way bearing, one way clutch, backstop clutch, overrunning clutch and needle roller bearing with high technology. including NF, BS, BS-R, BSEU, MZ, MZEU,MA, MI, MX, CSK (KK, BB) , DC, AS (TSS, NSS) , ASNU (TFS, NFS) , FWD, B200, RSBW, RSCI, MZ, HF, HFL. . . Etc.

The products are widely used in conveying machine, reducer, hoist, elevator, automobile, home appliances, textile machinery, printing machinery, food machinery and mine machines etc. In addition, special clutch bearings are also provided in accordance upon customers’ requirement for various applications.

QQ:2327876383

Mobile Phone:13776867712

Email:aodelongclutch@foxmail.com

http://www.aodclutch.com

Address: Niutang lndustrial Zone -Changzhou City,Jiangsu Province