Type AE is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside diameter is a standard ball bearing dimension.

A typical arrangement is to install this type beside a bearing with the same housing diameter tolerance as shown on the following page.

The inner race is keyed to the shaft. The outer race has a h6 tolerance and should be fitted in a housing with a K7 tolerance. Additional side notches provide for positive torque transmission.

If the housing tolerance is to R6, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

Changzhou aodelong Clutch Co., Ltd. is a manufacturer specialized in Producing Various cam clutch, one way bearing, one way clutch, backstop clutch, overrunning clutch and needle roller bearing with high technology. including NF, BS, BS-R, BSEU, MZ, MZEU,MA, MI, MX, CSK (KK, BB) , DC, AS (TSS, NSS) , ASNU (TFS, NFS) , FWD, B200, RSBW, RSCI, MZ, HF, HFL. . . Etc.

The products are widely used in conveying machine, reducer, hoist, elevator, automobile, home appliances, textile machinery, printing machinery, food machinery and mine machines etc. In addition, special clutch bearings are also provided in accordance upon customers’ requirement for various applications.

QQ:2327876383

Mobile Phone:13776867712

Wechat:13776867712

Email:aodelongclutch@foxmail.com

Address: Niutang lndustrial Zone -Changzhou City,Jiangsu Province